HP estimate??
#1
Member
JUNIOR BUILDER
Thread Starter
Join Date: Apr 2003
Posts: 79
HP estimate??
My new motor goes on the dyno Monday, any guess what it will make. 408 CI windsor. 4.03 borex4.00 stroke. 12:1 compression, AFR 205 cyliner heads, 2.08 Intake 1.60 Exhaust, Edelbrock Victor Jr Intake, Mighty Demon 800 carb, MSD billet dist. solid roller .672 .669 lift, 260 270 duration at .050 106 lobe seperation. 1 3/4 Long tube Hooker super comp headers. I am hoping it will make at least 600 but I guess we will see.
#2
i think ya gonna be all over it give or take a few.
years back i had a 406 sbc 12 :1 , Cast world heads 2.05's ,portmatched vic/jr intake 750cfm carb..similiar camshaft ,aluminum rod motor and it made 609hp and 554 Tq
So it should be all over 600hp range IMO...lET US KNOW
years back i had a 406 sbc 12 :1 , Cast world heads 2.05's ,portmatched vic/jr intake 750cfm carb..similiar camshaft ,aluminum rod motor and it made 609hp and 554 Tq
So it should be all over 600hp range IMO...lET US KNOW
__________________
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
#6
Member
JUNIOR BUILDER
Thread Starter
Join Date: Apr 2003
Posts: 79
Well, I didnt get to dyno my motor because it is below zero here and the cold air intake on the dyno here comes from outside. It is going on the dyno the 21st of this month if nothing else unexpected comes up.
#8
Senior Member
DYNO OPERATOR
Join Date: Apr 2008
Posts: 504
My guess is 410 uncorrected horsepower peak. The calculation is pounds of fuel per hour divided by the Brake specific fuel consumption right off your dyno sheet. That is the observed horsepower, before the sea level correction that the engine is NOT doing on the dyno.
#9
Senior Member
DYNO OPERATOR
Join Date: Mar 2008
Location: New Orleans,La
Posts: 515
Originally Posted by TopspeedLowet
My guess is 410 uncorrected horsepower peak. The calculation is pounds of fuel per hour divided by the Brake specific fuel consumption right off your dyno sheet. That is the observed horsepower, before the sea level correction that the engine is NOT doing on the dyno.