Looking for
#1
Senior Member
RACING JUNKIE
Thread Starter
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Looking for
I am needing to buy some new belts for my new motor setup, Need a Gilmer belt for fuel pump and Moroso vaccum pump.
Where can I get these at ? I have the # off my old belt on the fuel pump, 240LH12 I know what the 240 means 24" right ? what does the LH 12 mean ?
Anyone know what the belt code is for a moroso vacuum pump ?
thanks for the help
Where can I get these at ? I have the # off my old belt on the fuel pump, 240LH12 I know what the 240 means 24" right ? what does the LH 12 mean ?
Anyone know what the belt code is for a moroso vacuum pump ?
thanks for the help
#2
David,
240 is 24" belt. The odd thing about the number you posted is that all of my books showing timing belts, (Gilmer) lists L as 3/8 pitch and H as 1/2" pitch. The 12 might mean 1/2" width but don't know why it has L and H on the same belt. Go to mcmastercarr.com and look up timing belts, see if this number is what you are needing 6484K149.
Curtis
240 is 24" belt. The odd thing about the number you posted is that all of my books showing timing belts, (Gilmer) lists L as 3/8 pitch and H as 1/2" pitch. The 12 might mean 1/2" width but don't know why it has L and H on the same belt. Go to mcmastercarr.com and look up timing belts, see if this number is what you are needing 6484K149.
Curtis
#3
Senior Member
RACING JUNKIE
Join Date: Jul 2007
Location: Independence, Missouri
Posts: 1,181
gilmer belts
Hoerr racing products, has the best prices on gilmer belts I have found.Their phone number is (866)851-7223. their web address is www.hrpworld.com. I bought 2 belts from them last year for 9.50 a piece, they probably have gone up by now.Lol
#4
Re: Looking for
Originally Posted by hammertime
I am needing to buy some new belts for my new motor setup, Need a Gilmer belt for fuel pump and Moroso vaccum pump.
Where can I get these at ? I have the # off my old belt on the fuel pump, 240LH12 I know what the 240 means 24" right ? what does the LH 12 mean ?
Anyone know what the belt code is for a moroso vacuum pump ?
thanks for the help
Where can I get these at ? I have the # off my old belt on the fuel pump, 240LH12 I know what the 240 means 24" right ? what does the LH 12 mean ?
Anyone know what the belt code is for a moroso vacuum pump ?
thanks for the help
i had to go with a slightly longer belt for my vaccum pump on my set up ..i went to a gates belt supplier and they orderd me a few different belts.
if you goggle gates...they will give you alist of distributers in your area.
__________________
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
#5
Senior Member
RACING JUNKIE
Thread Starter
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Originally Posted by doorracer
David,
240 is 24" belt. The odd thing about the number you posted is that all of my books showing timing belts, (Gilmer) lists L as 3/8 pitch and H as 1/2" pitch. The 12 might mean 1/2" width but don't know why it has L and H on the same belt. Go to mcmastercarr.com and look up timing belts, see if this number is what you are needing 6484K149.
Curtis
240 is 24" belt. The odd thing about the number you posted is that all of my books showing timing belts, (Gilmer) lists L as 3/8 pitch and H as 1/2" pitch. The 12 might mean 1/2" width but don't know why it has L and H on the same belt. Go to mcmastercarr.com and look up timing belts, see if this number is what you are needing 6484K149.
Curtis
#6
Originally Posted by hammertime
Originally Posted by doorracer
David,
240 is 24" belt. The odd thing about the number you posted is that all of my books showing timing belts, (Gilmer) lists L as 3/8 pitch and H as 1/2" pitch. The 12 might mean 1/2" width but don't know why it has L and H on the same belt. Go to mcmastercarr.com and look up timing belts, see if this number is what you are needing 6484K149.
Curtis
240 is 24" belt. The odd thing about the number you posted is that all of my books showing timing belts, (Gilmer) lists L as 3/8 pitch and H as 1/2" pitch. The 12 might mean 1/2" width but don't know why it has L and H on the same belt. Go to mcmastercarr.com and look up timing belts, see if this number is what you are needing 6484K149.
Curtis
[img][/img]
__________________
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
Bjuice..
"I'M YOUR HUCKLEBERRY ! "