Header Help
#2
got a lot of cross breeds that run around here chevy bullet/mustang body.
everyone of the sbc/ford combos i saw was custom made headers...
now they have had good luck putting off the shelf 55 chevy headers on the big block car..
also you need to go ahead and pLan on putting a AJE k-member on it...save a lot of header space and lose some weight..
Brian
everyone of the sbc/ford combos i saw was custom made headers...
now they have had good luck putting off the shelf 55 chevy headers on the big block car..
also you need to go ahead and pLan on putting a AJE k-member on it...save a lot of header space and lose some weight..
Brian
__________________
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
Bjuice..
"I'M YOUR HUCKLEBERRY ! "
#4
Senior Member
RACING JUNKIE
Join Date: May 2006
Posts: 2,044
Here's a link to a site I found that uses the V8 to S10 swap headers into the fox body stangs.
Looks like easy to follow instructions. Also click on gallery they have showing the complete conversion to sbc.
Goodluck, Charles
http://www.350monstang.com/headermod.htm
Looks like easy to follow instructions. Also click on gallery they have showing the complete conversion to sbc.
Goodluck, Charles
http://www.350monstang.com/headermod.htm
#6
Senior Member
RACING JUNKIE
Join Date: May 2006
Posts: 2,044
Yeah Kooks has them and their only $768 bucks, plus shipping.
What a deal!
http://www.kookscustomheaders.com/show.php?pid=794
Hell you can probably buy a 2nd generation camaro roller for that much.
Goodluck, Charles
What a deal!
http://www.kookscustomheaders.com/show.php?pid=794
Hell you can probably buy a 2nd generation camaro roller for that much.
Goodluck, Charles
#8
Junior Member
APPRENTICE
Join Date: Apr 2007
Posts: 22
MY BROTHER HAS THIS SAME SETUP AND USED A SET OF 69 CAMARO HEADERS IN IT, WORKED GREAT JUST NEEDED ONE TUBE MODIFIED. ALSO A SET OF S-10 HEADERS WILL FIT FROM WHAT I HAVE HEARD ALL DEPENDS ON YOUR CHASSIS AND HOW YOU HAVE IT SET UP