Chinese look a like Little-M block
08-20-2009, 07:10 PM
#41
Junior Member
SHOW GUEST
Join Date: Nov 2008
Posts: 4
Originally Posted by MEMRACING62
carl, keep posting any testing results on this block you come up with. it seems like the defenders of this block all have a vested interest in it.
Again, I'm not defending the brand x Chinese block, I have no doubt that is a cheap piece of crap.
I do not have any vested interest in the Chinese blocks or the block that PBM is selling either.
Mark
08-21-2009, 12:17 AM
#42
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Nov 2003
Location: NORTHEAST
Posts: 290
Carl,
I post on speedtalk, but haven't about this subject.
I have read & reread your post. I will quote you:
"I beleive PBM is selling them with there name on them!!"
Again I would ask, why slander PBM & Wheeler until you know for a fact that they are guilty of what you are accusing them of doing???
I post on speedtalk, but haven't about this subject.
I have read & reread your post. I will quote you:
"I beleive PBM is selling them with there name on them!!"
Again I would ask, why slander PBM & Wheeler until you know for a fact that they are guilty of what you are accusing them of doing???
Again Mr low poster this again is my quote
"I beleive PBM is selling them with there name on them!!"
So don't put words in my mouth
And if you have read all my posts you will see I have never seen a PBM block to compare against.
08-21-2009, 06:25 AM
#43
Junior Member
SHOW GUEST
Join Date: Sep 2008
Posts: 5
Originally Posted by hink
Carl,
I post on speedtalk, but haven't about this subject.
I have read & reread your post. I will quote you:
"I beleive PBM is selling them with there name on them!!"
Again I would ask, why slander PBM & Wheeler until you know for a fact that they are guilty of what you are accusing them of doing???
I post on speedtalk, but haven't about this subject.
I have read & reread your post. I will quote you:
"I beleive PBM is selling them with there name on them!!"
Again I would ask, why slander PBM & Wheeler until you know for a fact that they are guilty of what you are accusing them of doing???
Again Mr low poster this again is my quote
"I beleive PBM is selling them with there name on them!!"
So don't put words in my mouth
And if you have read all my posts you will see I have never seen a PBM block to compare against.
****EDIT POST****
Grow up this is a technical section. NO BASHING HERE!
Site Admin.
topsportsman1
Tom McDunnah
08-21-2009, 06:43 AM
#44
Junior Member
SHOW GUEST
Join Date: Sep 2008
Posts: 5
I don't get the "low poster", "first time poster" comments either. At one time everyone was a first time poster, even you. I've been a member here for almost a year & check it out every once in a while when I need some info because there are some very knowledgeable people that post here. I do this on many forums & every so often I decide to throw my hat in the ring. On almost every forum I get the "low post" comment so it's not just you. I'm just saying I don't get it.
08-21-2009, 09:27 AM
#46
Senior Member
DYNO OPERATOR
Join Date: Mar 2008
Location: New Orleans,La
Posts: 515
this is my opinion,
It just shows what your intrest are,as if you have a stake in it.
thats all,im sure y'all or fine people.
hink talk's up dart ,dose he have a stake in it I don't know.
It just shows what your intrest are,as if you have a stake in it.
thats all,im sure y'all or fine people.
hink talk's up dart ,dose he have a stake in it I don't know.
08-21-2009, 10:51 AM
#47
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Posts: 4,137
Originally Posted by montecarlo84
this is my opinion,
It just shows what your intrest are,as if you have a stake in it.
thats all,im sure y'all or fine people.
hink talk's up dart ,dose he have a stake in it I don't know.
It just shows what your intrest are,as if you have a stake in it.
thats all,im sure y'all or fine people.
hink talk's up dart ,dose he have a stake in it I don't know.
08-21-2009, 10:57 AM
#48
Senior Member
RACING JUNKIE
Join Date: Sep 2007
Location: orland pk il
Posts: 2,399
Originally Posted by Tod74
Originally Posted by montecarlo84
this is my opinion,
It just shows what your intrest are,as if you have a stake in it.
thats all,im sure y'all or fine people.
hink talk's up dart ,dose he have a stake in it I don't know.
It just shows what your intrest are,as if you have a stake in it.
thats all,im sure y'all or fine people.
hink talk's up dart ,dose he have a stake in it I don't know.
08-21-2009, 11:08 AM
#49
Member
MASTER JOURNEYMAN
Join Date: Feb 2008
Posts: 45
I'm ordering mine
Just got off the phone with PBM and i'm ordering a new block for my new 434ci.. In my opinion the block that Hink is dealing with is in no manner a PBM block, one of the most glaring reasons being on the pan rail opposite the oil filter they have the PBM logo cast into the block as well as cast into all the main caps also when bored out to 4.185 the Dart states the cylinders will still be .230 thick and the PBM .250 my reasoning the PBM might be a slightly stouter piece. One line of reasoning i can't get away from is the fact i find it hard to believe PBM is going to risk thier reputation to bring a piece of junk to market,let's face it in the age of the internet it does'nt take long for junk to be exposed for what it is.PS the block is 1825.00.
08-21-2009, 01:26 PM
#50
Senior Member
EXPERT BUILDER
Thread Starter
Join Date: Nov 2003
Location: NORTHEAST
Posts: 290
Re: I'm ordering mine
Originally Posted by heshtesh
Just got off the phone with PBM and i'm ordering a new block for my new 434ci.. In my opinion the block that Hink is dealing with is in no manner a PBM block, one of the most glaring reasons being on the pan rail opposite the oil filter they have the PBM logo cast into the block as well as cast into all the main caps also when bored out to 4.185 the Dart states the cylinders will still be .230 thick and the PBM .250 my reasoning the PBM might be a slightly stouter piece. One line of reasoning i can't get away from is the fact i find it hard to believe PBM is going to risk thier reputation to bring a piece of junk to market,let's face it in the age of the internet it does'nt take long for junk to be exposed for what it is.PS the block is 1825.00.
PBM's aluminum block there is PBM casted into the block.