Hey Guys thanks a Million for all your help. Now I'm begining to understand a little more about this setup. the front end is not at all stock it's been all changed out to rack and pinion steering and none of it looks stock. it is a motor plate setup no side mounts. I'll try the stiffening up on the front more and see if that helps I just looked at the ladder bars and they look like the pointed down about 1'' out of level. the bracket has 5 holes and it's in the middle one. so there are 2 open holes below where it is at now. in my last statement about it comming staight up I was comming out @5000 rpm's and have since used 4000 rpm even at that height the car settles back down very easy it dosent slam down other than looking at the sky you can't tell it even comes up. I'm just trying to make sure I'm doing everything right to get the most out of the car. again on the chassis the whole car from front to back the left side is set down 1'' from the right side. again I'm trying to learn so Thanks For yall's HELP.
Andy