View Single Post
Old 04-12-2009, 11:04 PM
  #4  
radicalz
Senior Member
MASTER BUILDER
 
Join Date: Dec 2004
Location: out of my mind in Kalamazoo, MI
Posts: 179
Default Re: big block motor swap

Originally Posted by jason26933
I have a 67 chevy impala convertible with a 350 sb that was put in place of a 327. So the Impala was originally a sb 327 car. I am new to the muscle car world. I am looking at a gm perf. parts 454 to put in the Impala. I know I will have to buy new motor mounts and bb headers. Is there any major concerns I should be aware of or will it be a pretty easy swap. Any suggestions or transmissions. I would like to get a transmission with overdrive but was told a TH 400 is more affordable. Will I have to move the transmission mount and if so is there different mounting spots on this particular car?? Any suggestions with my questions or an ideas would be greatly appreciated. I am nervous and somewhat fearful I may be getting in over my head. Due have numerous friends with more experience than me that are willing to help. Nervous in OHIO.[/b]
I did my swap from small to BBC used the same motor mounts just sits a little back from original maybe about 1/2 inch closer the the firewall...can even fit a GM HEI in there too. Your engine bay has enough room to house a jet engine if you wanted to put that in place. Should be no problem at all installin a BBC under your hood....but have new mounts in place since then....so if your planning on the new mounts do it while you have the chance....I also have a built TH350 in back of mine with trans brake, 3800 converter....it is all in your planning
radicalz is offline