S10 suspension setup help..Front end rise and ride height
Hello ..I have a back halfed sbc s10 with ladder bars 14.5x 32's. Running 10.40's 60ft is 1.48. non adjustable rear coil over shocks. Truck weighs 2890. Adjustable comp eng front shocks- stock front end.
Never a problem hooking.. but when i launch it moves a little to the right.. going down the track the rear is lower then the front end. So i feel air is getting under the front end. My 60ft is not consistant 1.48
I have comp engineering adjustable shocks in front set at 90/10.Rear shocks have no adjustment. What im thinking i need to do is
1- take the ride height in the rear up @2in
2- tighten the front shocks from 90/10 to 80/20
3 -Install a good set of rear double adjustable shocks
Any help u guys could give would be appreciated
thanks Keith